|
VeriFone PCCharge Pro/Payment Server Tested Hardware List
The following hardware has been tested and found to work with PCCharge™ Pro and Payment Server version 5.7.1i. Click here to download this list in Adobe® Acrobat® format.
For a list of hardware tested with PCCharge Client version 5.7.1i, please refer to the document PCCharge Client Supported Hardware List (click here to download this list in Adobe® Acrobat® format).
We test PCCharge with a wide range of hardware in a variety of conditions. If you have hardware not shown on this list and are able use it successfully with your copy of PCCharge, please contact us at support@pccharge.com and inform us of your results.
Note:Set up each device as specified in the Notes column. If no additional information is given (other than the device to be selected from the drop-down list in PCCharge), use the default settings.
Report Printers
PCCharge products support most standard Windows compatible printers for report printing.
top
Tested Card Readers
| Manufacturer |
|
Product |
|
Vista |
|
XP |
|
2003 |
|
2000 |
|
Notes |
|
Cherry |
|
Cherry Keyboard MY 7000 |
|
|
|
x |
|
|
|
x |
|
Set up in PCCharge as Keyboard Wedge. Review the Note at the end of this table and refer to your Cherry manual to determine how to configure the following settings:
• Enable Header for track 1 and set to %
• Enable Terminator for track 1 and set to ?
• Enable Header for track 2 and set to ;
• Enable Terminator for track 2 and set to ? |
|
Cherry |
|
Cherry Keyboard MY 8000 |
|
|
|
|
|
|
|
x |
|
Set up in PCCharge as Keyboard Wedge. Review the Note at the end of this table and refer to your Cherry manual to determine how to configure the following settings:
• Enable Header for track 1 and set to %
• Enable Terminator for track 1 and set to ?
• Enable Header for track 2 and set to ;
• Enable Terminator for track 2 and set to ? |
|
IDTech |
|
Serial Model # WCR3321-12 |
|
|
|
x |
|
x |
|
x |
|
Set up in PCCharge as Serial Reader.
• Baud = 9600
• Parity = Even
• Data Bits = 7 |
|
IDTech |
|
USB Model # IDT3331-12U |
|
x |
|
x |
|
x |
|
x |
|
Set up in PCCharge as Keyboard Wedge. |
|
Ingenico |
|
eN-Check 2500 |
|
|
|
x |
|
x |
|
x |
|
Set up in PCCharge as Ingenico 2500. |
|
MagTek |
|
Maxi Micr |
|
x |
|
x |
|
x |
|
x |
|
Check and card swipe device. Set up in PCCharge as Keyboard Wedge. |
|
MagTek |
|
Mini Micr |
|
x |
|
x |
|
x |
|
x |
|
Check and card swipe device. Set up in PCCharge as Keyboard Wedge. |
|
SEMTEK |
|
Model 9272USB |
|
|
|
x |
|
x |
|
x |
|
Set up in PCCharge as Keyboard Wedge. |
|
Uniform Industrial |
|
USB Model MSR210U-33AUBN |
|
|
|
x |
|
x |
|
x |
|
Set up in PCCharge as Keyboard Wedge. |
|
VeriFone |
|
PCCharge Partner |
|
x |
|
x |
|
x |
|
x |
|
Set up in PCCharge as Keyboard Wedge. This device is a combined PIN pad, card reader, and receipt printer. You must set up the PIN pad functionality of this device prior to setting up any other functionality. Consult the documentation included with this device to determine how to set it up. |
|
VeriFone |
|
SC 5000 (MAC or DUKPT) |
|
x |
|
x |
|
x |
|
x |
|
Set up in PCCharge as Keyboard Wedge. This device is a combined PIN pad and card reader. You must set up the PIN pad functionality of this device prior to setting up any other functionality. Smart card reader functionality is not supported. |
Note: Every Ingenico 2500 was manufactured in one of two possible configurations: as a standalone check reader, or as a check reader with an integrated card reader. If you have an Ingenico 2500 card/check reader and want to use the card reader component of that device, select the option Ingenico 2500. You are not required to use the integrated Ingenico card reader; you may use a separate card reader.
Note: The following example text shows the correct format of a swiped transaction after a Cherry keyboard device has been properly configured. You can use Microsoft's Notepad to view a swiped transaction.
%B6011000998980019^DISCOVERY / JD^0412123456?
;6011000998980019=0412123456?
Additionally, Cherry Electronics has created a page on their website that details the setup of the Cherry Keyboard MY 7000/8000. Click here to access that page.
top
Tested PIN pads
Note: Some PIN pads will only work with certain payment processing companies. Check with your processing company and/or merchant service provider to determine which PIN pads you can use.
| Manufacturer |
|
Product |
|
Vista |
|
XP |
|
2003 |
|
2000 |
|
Notes |
|
@pos |
|
PenWare 3100 |
|
|
|
x |
|
x |
|
x |
|
Signature capture device. Set up in PCCharge as @pos PenWare 3100. |
|
Ingenico |
|
3010 |
|
|
|
x |
|
x |
|
x |
|
Set up in PCCharge as Ingenico 3010. |
|
Ingenico |
|
eN-Crypt 2100 |
|
|
|
x |
|
x |
|
x |
|
Set up in PCCharge as eN-Crypt 2100. |
|
VeriFone |
|
PINpad 1000 / PINpad 1000SE |
|
x |
|
x |
|
x |
|
x |
|
Set up in PCCharge as VeriFone 101/1000.
• Baud = 1200
• Parity = Even
• Data Bits = 7
• Time Out = 4. |
|
VeriFone |
|
2000 |
|
|
|
x |
|
x |
|
x |
|
Set up in PCCharge as VeriFone 2000.
• Baud = 1200
• Parity = Even
• Data Bits = 7
• Time Out = 4. |
|
VeriFone |
|
Everest / Everest Plus |
|
|
|
x |
|
x |
|
x |
|
Set up in PCCharge as VeriFone Everest.Device must be on COM port 1. Requires device drivers from VeriFone. |
|
VeriFone |
|
PCCharge Partner |
|
x |
|
x |
|
x |
|
x |
|
Set up in PCCharge as PCCharge Partner. This device is a combined PIN pad, card reader, and receipt printer. You must set up the PIN pad functionality of this device prior to setting up any other functionality. Consult the documentation included with this device to determine how to set it up. |
|
VeriFone |
|
PCCharge Performer (SC 5000 (MAC)) |
|
x |
|
x |
|
x |
|
x |
|
Set up in PCCharge as VeriFone SC 5000 (MAC). Canadian debit processing only. Note that the SC 5000 requires special software to work with PCCharge, and therefore must be purchased as part of the PCCharge Performer bundle.
• Baud = 9600
• Parity = None
• Data Bits = 8
• Time Out = 4. |
|
VeriFone |
|
PCCharge Performer (SC 5000 (DUKPT)) |
|
x |
|
x |
|
x |
|
x |
|
Set up in PCCharge as VeriFone SC 5000. American debit processing only. Note that the SC 5000 requires special software to work with PCCharge, and therefore must be purchased as part of the PCCharge Performer bundle.
• Baud = 1200
• Parity = Even
• Data Bits = 7
• Time Out = 4. |
top
Tested Check Readers
| Manufacturer |
|
Product |
|
Vista |
|
XP |
|
2003 |
|
2000 |
|
Notes |
|
Ingenico |
|
eN-Check 2500 |
|
|
|
x |
|
x |
|
x |
|
Check and card swipe device. Set up in PCCharge as Ingenico eN-Check 2500. |
|
Ingenico |
|
eN-Check 2600 (must be in RDM emulation mode) |
|
|
|
x |
|
x |
|
x |
|
Set up in PCCharge as RDM EC5002i.
• Parity = None
• Data Bits = 8
Next, consult the Check Reader Extended Setup section of the PCCharge manual. |
|
MagTek |
|
Maxi Micr |
|
x |
|
x |
|
x |
|
x |
|
Check and card swipe device. Set up in PCCharge as Keyboard Wedge. |
|
MagTek |
|
Mini Micr |
|
x |
|
x |
|
x |
|
x |
|
Check and card swipe device. Set up in PCCharge as Keyboard Wedge. |
|
RDM |
|
EC5002i |
|
|
|
x |
|
x |
|
x |
|
Set up in PCCharge as RDM EC5002i.
• Parity = None
• Data Bits = 8
Next, consult the Check Reader Extended Setup section of the PCCharge manual. |
top
Tested Receipt Printers
Note: Windows' generic text printer drivers were used for all printers that were tested on Windows 2003.
| Manufacturer |
|
Product |
|
Vista |
|
XP |
|
2003 |
|
2000 |
|
Notes |
|
Citizen |
|
CBM 1000 |
|
|
|
x |
|
x |
|
x |
|
Manual tear-off. Drivers available online. Set up in PCCharge as Roll Printer. Set the Column Width to 40. |
|
Citizen |
|
iDP 3550 |
|
|
|
x |
|
x |
|
x |
|
Drivers available online. Set up in PCCharge as Roll Printer. Set the Column Width to 40. |
|
Citizen |
|
CPM 10 (without card reader) |
|
|
|
x |
|
|
|
x; |
|
Thermal printer, portable device. Drivers available online. Set up in PCCharge as Roll Printer. Set the Column Width to 40. |
|
Star |
|
SP2000 |
|
|
|
x |
|
x |
|
x |
|
Manual tear-off. Drivers available online. Set up in PCCharge as Roll Printer. Set the Column Width to 40. |
|
Star |
|
Micronics TSP143U |
|
|
|
x |
|
x |
|
x |
|
Automatically cut-off. Thermal printer. Drivers available online. Set up in PCCharge as Roll Printer. Set the Column Width to 40. |
|
Star |
|
Micronics TSP643C |
|
|
|
x |
|
x |
|
x |
|
Automatically cut-off. Thermal printer. Drivers available online. Set up in PCCharge as Roll Printer. Set the Column Width to 40. |
|
Star |
|
Micronics TSP700 |
|
x |
|
x |
|
x |
|
x |
|
Automatically cut-off. Thermal printer. Drivers available online. Set up in PCCharge as Roll Printer. Set the Column Width to 40. Vista Note: The Star Micronics drivers included with Microsoft Vista were used to test this device. |
|
Epson |
|
M129C TM-T88IIIP |
|
|
|
x |
|
|
|
x |
|
Drivers available online. Set up in PCCharge as Roll Printer. Set the Column Width to 39. |
|
Epson |
|
TM-T90 |
|
|
|
x |
|
|
|
x |
|
Set up in PCCharge as Roll Printer. Set the Column Width to 39. |
|
Epson |
|
TMU220B |
|
|
|
x |
|
|
|
x |
|
Set up in PCCharge as Roll Printer. Set the Column Width to 45. |
|
VeriFone |
|
PCCharge Partner |
|
x |
|
x |
|
x |
|
x |
|
Set up in PCCharge as PCCharge Partner. This device is a combined PIN pad, card reader, and receipt printer. You must set up the PIN pad functionality of this device prior to setting up any other functionality. Consult the documentation included with this device to determine how to set it up. |
top
Tested Modems
To set up each device, access PCCharge's Manual Modem Setup window (instructions given in the PCCharge manual). Use the device settings specified in the Notes column.
| Manufacturer |
|
Product |
|
Vista |
|
XP |
|
2003 |
|
2000 |
|
Notes |
|
3com |
|
56K v.90 mini PCI Modem (for laptops) |
|
|
|
x |
|
x |
|
x |
|
To set up in PCCharge, click the Detect Modem Settings button found on the Manual Modem Setup window (described in the Modem section of the PCCharge User's Manual). |
|
AT&T |
|
Dataport Express Part 3715-A1-201iVC Model F-1114V/R6 |
|
|
|
x |
|
x |
|
x |
|
To set up in PCCharge, click the Detect Modem Settings button found on the Manual Modem Setup window (described in the Modem section of the PCCharge User's Manual). Also, try the following initialization string:
AT&FS0=0&D2E0V1%C0\N0 |
|
US Robotics |
|
56K Pnp EXT Model 00568602 |
|
x |
|
x |
|
x |
|
x |
|
To set up in PCCharge, click the Detect Modem Settings button found on the Manual Modem Setup window (described in the Modem section of the PCCharge User's Manual). Also, try using WH1 (from the Modem drop-down list). |
|
US Robotics |
|
14400 FAX Modem EXT Model CJE-0265 |
|
|
|
x |
|
x |
|
x |
|
To set up in PCCharge, click the Detect Modem Settings button found on the Manual Modem Setup window (described in the Modem section of the PCCharge User's Manual). Also, try using WH1 (from the Modem drop-down list). |
|
Zoom |
|
v.92 USB Model 3090A |
|
|
|
x |
|
x |
|
x |
|
To set up in PCCharge, click the Detect Modem Settings button found on the Manual Modem Setup window (described in the Modem section of the PCCharge User's Manual). Also, try using WH1 (from the Modem drop-down list). Currently nonfunctional with CCRD. |
top
|
